Framelits Bunny & Rainbow

Playing with Framelits & Thinlits can result in some fun card or scrapbook embellishments.

Since it is now officially Spring here (the weather will follow eventually), my mind is on colors, flowers, and Easter.

I’ve had this bunny in my head since I made the black cat version back around Halloween, but finally sat down to make it with Easter just around the corner.

.

The Bunny was made with the Swirly Scribbles Thinlits from Stampin’ Up!,  which you see below, using the small & medium (trimming off barbs) circle swirls and the leaves as ears (interior/exterior).

Note: You can make his bigger friend using medium & large circle swirls!

Swirly Scribbles Thinlits Dies

I Used Chocolate Chip & Flirty Flamingo Cardstock to create my bunny and added a Smokey Slate ribbon bow and handmade (approximately 1/2″) Whisper White baker’s twine pom-pom tail.

Want to forgo making a pom-pom bunny tail?  March’s Paper Pumpkin had some cute pom-poms about this size which you could use (there’s even a Fliry Flamingo one there!) if you have them leftover.  OR That Small circle in the bottom right corner of the Thinlets photo above would be about the right size to make a cardstock tail AND it would lie flat for mailing a card!

After creating the above bunny, I decided to make a rainbow from the Up & Away Thinlits & Stitched Shapes Framelits.

Those clouds from the Up & Away Thinlits are so fun to use.

  • The Rainbow uses all of the Stitched Shapes Framelit Circles.
  • Just nest them inside each other as you cut the color-For the Cherry Cobbler you would nest the two largest circles.
  • I use Washi tape to keep the dies in place as I run them through the Big Shot.
  • Since I felt I really needed to add the blue layer and was out of circles, I went ahead and used a stitched oval for that color.  It is hidden by the clouds enough that the different shape isn’t immediately evident.
  • I created this 6″x4″ pocket card with the A Little Foxy paper stack and added some raining Cherry Cobbler hearts cut from a die in the Everyday Jars Framelits.

I eventually decided to make a scrapbook layout with another bunny & rainbow which included the Basket Builder Framelits Dies for the basket, eggs, chocolate bunny, chicks, peeps, and grass.

The Falling In Love DSP includes this Soft Sky dandelion fluff paper and I used the coordinating Falling In Love Cardstock pack for the Blushing Bride background 12″x12″.

Whether you choose to make your Thinlit & Framelit designs into pocket cards for scrapbooking, card toppers for cards or embellishments for a scrapbook page (Or all of the above!), have fun creating!

Thanks for stopping by.

Until next time…

-Joanne

Dragonfly Dreams meets Build It Framelits

Did you notice the hexagon die in the Build It Framelits?  How about the bumble bee in the Dragonfly Dreams set?  If we combine these two sets… Hexagon + Bee = Bee Hive!

And who says that dragonfly can’t flutter on by the hive?

The Details:

  • The card itself is 5″x5″ with the dimensional raised top layer with cut out hexagons & hand stitching cut @ 4.75″x4.75″.
  • The hexagon die itself is kept in the cut area to get the perfect pen line tracing around the outside of the cut. I used the Project Life Pens for this card.
  • The Delightful Dijon DSP found in the Serene Scenery pack is cut @ 4 7/8″x4 7/8″.
  • The shaded bee is stamped with delightful dijon and a basic black die cut bee adhered over the image.  These were then fussy cut with Snips and for a two of the bees I cut the wings and rearranged them for different in-flight looks.
  • Clear Wink of Stella was added to the bees and the dragonfly.
  • The sentiment was stamped & embossed (I later redid this one when my eyes in more light saw how badly it embossed!)

This second card uses the same paper stack, card stock colors, Dragonfly Dreams bundled set, but it does not include the Build It set on the outside, but a Delightful Dijon hexagon and bee (exactly as above) on the interior Very Vanilla writing area/liner of the card.

Offsetting the regular layers-card base: 4.25″x5.5′, black layer 4″x5.25″, DSP layer: 3.75″x5″ gives a different look and adds movement to this dragonfly card. Clear Wink of Stella on the dragonfly & inside bee and gold metallic thread make this a quick card to put together.

By combining the hexagon from the Build It Framelits and the bee in the Dragonfly Dreams set I will find myself using both sets more. **Today’s Tip: Always look around and see what uses you may have by combining the sets you own.

Until next time…

-Joanne

 

 

 

Falling In Love DSP Scrapbook Layout

The Falling In Love DSP which is available in the Stampin’ Up! 2017 Occasions catalog has some great designs for cards and scrapbook pages alike.

Today, I’m sharing a simple scrapbook layout with the floral Rich Razzleberry pattern which comes in this 12″x12″ Falling In Love paper pack.

On the page above, I simply cut 5 Rich Razzleberry card stock pieces at 4.25″x4.25″ and spaced  4 of them 1/4″ from sides; centering the last as a center diamond.  This leaves space for 5 4″x4″ photos, or as I did here- an embellishment with the Jar of Love stamps & dies in the center.

Since you typically get 2 of each pattern in a pack of DSP (unless it is a specialty paper), it makes it easy to do double page layouts using the DSP as the background paper.

Using DSP as your background paper provides interest and can provide texture too, depending on the paper.

As you see in the second page of the layout, I continued with the Jar of Love products on a Stitched Shapes Framelits Oval to create the area which will hold a title/journal area.  The photo mats for this page are 4.25″x6.25″ and 3.25″x4.25″.  These mats are spaced 1/2″ from sides and each other.

These pages went together quickly for me.  It did help that I had previously stamped and cut the Jar of Love materials when I was working on another project.

The design for these pages creates easy layout template where many other patterned papers and stamp/die sets could be substituted to make another theme.  Try substituting the Falling In Love DSP for the Urban Underground DSP and the Jar of Love items for the Build It tools.  Do both layouts & add photos and check Mother’s Day and Father’s Day off your list!

Until next time…

-Joanne

 

 

 

An Easter Card from the Basket Builder Framelits

This Easter card made from the Stampin’ Up! Basket Builder framelits takes me back to the days when I’d go hunting for my hidden Easter basket first thing in the morning before we headed to church.  Our baskets always included marshmallow peeps, eggs (chocolate & dyed hard-boiled), a chocolate bunny, and various other goodies from toys to coloring books or school supplies we needed.  We always reused the same baskets, which were admittedly very large-and couldn’t be hidden in very many places so as we aged we discovered them more quickly since the same places seemed to be reused.  But the fun was in the discovery and love my parents put into the gifts.

This card features a rattan looking basket, die cut and inked in Crumb Cake, nestled in Garden Green grass and filled with die cut Peeps & some Pear Pizzazz grass trimmed to fit the basket.

Growing up in Pennsylvania, most of our Easter celebrations were held indoors because it was often raining outside.  So, I’ve included this in my card by using the rainy paper in the A Little Foxy DSP stack & some white die cut clouds created with the Up & Away Thinlits.

Perhaps you may not know that marshmallow peeps are also from Pennsylvania. So, it would be a rare Easter that those (then seasonal only) little Peeps & Chicks wouldn’t be in the basket or at least in the house.

I did not use the coordinating stamps for this particular card, but  I did buy the bundle and I expect to showcase other samples where the stamps & framelits were both used. I didn’t like that the stamp of the peep was missing a nose and the outline didn’t seem necessary for this card.  It was easy enough to hand dot/draw the eyes & nose with the black marker or my preference: the project life pens. This actually helped me produce them quicker too since I didn’t need to stamp first & line up the framelit to cut. I die cut first and drew faces on my whole pile of Peeps when I was done cutting. ***BTW: If this gives you an excuse to buy Peeps to see their little faces in real life, just blame it on research when you eat them.

By cutting the front of the blushing bride card stock 1/2″ shorter on one side (card stock will measure 4.25″x 10.5″ scored at 5.5″), I gave myself room to stamp “Happy Easter” from the Teeny Tiny Wishes stamp set which is in view from the front and also when the card is open.  On the inside I also added 3 die cut peeps with hand drawn faces. My Peep inside colors = Sweet Sugarplum, Daffodil Delight & Soft Sky. I used Peekaboo Peach & Flirty Flamingo for others on the front of the card and I believe Mint Macaron & So Saffron might work well also.

A small rhinestone accent allows me to also skip the stamping on the chocolate bunny- created with Chocolate Chip card stock, of course and also the bow-Blushing Bride to match the card base color.

Easter is April 16th this year; only a few weeks to get some cards made & in the mail to arrive on time to a few family members who used to stop by and celebrate the holiday weekend with us. My Peeps 🙂

Until next time…

-Joanne